Using the wrong panel thickness for the temperature range

Many fabricators use 60mm panels for freezer rooms to cut cost. This leads to condensation, ice buildup, and compressor overload. Freezer rooms (-18°C to -25°C) require minimum 120mm PPGL PUF, and deep freeze (-30°C to -40°C) needs 150mm.

Ignoring cooling load calculation and oversizing the compressor

Without structured load calculation, vendors guess compressor size — usually oversized. This wastes energy, causes short-cycling, reduces compressor life, and increases maintenance costs by 25–40%.

Poor door sealing and no strip curtain

Air infiltration through gaps in doors accounts for 15–25% of total cooling load. Every cold room must have properly gasketed doors with strip curtains and auto-closers to minimize thermal leaks.

Placing the condensing unit in a poorly ventilated area

The outdoor unit needs free airflow. Installing it in an enclosed space raises head pressure, reduces cooling capacity by up to 30%, and can trigger high-pressure cutoffs.

How long can a cold room hold temperature without power?

A well-insulated cold room (100mm+ PUF, cam-lock joints, sealed doors) can hold temperature for 4–8 hours depending on room size, product load, and ambient temperature. Poorly insulated rooms lose temperature in under 2 hours.

Should I install a backup generator for my cold room?

Yes, for any commercial cold storage. A generator sized at 1.5× the compressor kW is recommended. For pharma and vaccine storage, an automatic transfer switch (ATS) is mandatory to ensure zero-interruption cooling.

What happens to stored products during extended power failure?

Fruits and vegetables can tolerate 2–4°C rise for a few hours. Frozen products start thawing above -12°C. Pharma products may become non-compliant within 30 minutes of temperature excursion. Always monitor with data loggers.

When should I choose ammonia (R717) over freon-based refrigerants?

Ammonia is ideal for large-scale installations (>50 MT capacity) due to superior thermodynamic efficiency and zero ODP/GWP. However, it's toxic and requires trained operators, machine rooms, and safety systems — not suitable for small or urban setups.

What are the advantages of Daikin's freon-based systems?

Freon systems (R404A, R407C, R134a) are safer, compact, and require no machine room. Daikin's commercial units offer inverter efficiency, low noise, and are ideal for cold rooms up to 500 MT. They're the standard for 95% of Indian cold room installations.

Is R404A being phased out?

R404A has high GWP (3922) and is being phased down globally. Daikin is transitioning to R407C and R134a for medium-temperature, and R452A for low-temperature applications. HyperCold recommends future-proof refrigerant selection in every quotation.

What density PUF panel should I use?

Always use 40±2 kg/m³ density PPGL PUF panels. Lower density (32–36 kg/m³) panels are cheaper but have 20–30% worse insulation, leading to higher energy costs over 10+ years. HyperCold uses only 40+ density PPGL panels.

Cam-lock vs silicone-sealed panel joints — which is better?

Cam-lock (tongue and groove with mechanical locking) is the engineering standard. It creates an airtight seal that lasts 15+ years without maintenance. Silicone-sealed joints degrade in 2–3 years, causing air leaks and ice formation.

How to choose panel thickness for my application?

80mm for 2–15°C (fruits, vegetables, ripening, ante rooms). 100mm for 0–5°C (chiller, meat, pharma). 120mm for -18 to -25°C (freezer). 150mm for -30 to -40°C (deep freeze, blast freezer). Never compromise on thickness — the energy savings pay for the difference in under 2 years.

What's the difference between GI and SS skin panels?

GI (Galvanized Iron) skin is standard for most applications. SS (Stainless Steel) skin is required for pharma, food processing, and any environment needing regular washdown. SS panels cost 40–60% more but last significantly longer in corrosive environments.

Racked cold storage hall with palletised cartons under bright white lighting

The Cooling Expert™ · Daikin-Powered · Pan-India Installation

Cold Room Manufacturer in Indiafor Modular Cold StorageCommercial Refrigeration & Industrial Cooling Projects

Name: HyperCold™ – Cold Room Engineering
Address: 92, Araon Road Bypass NH19, Opp Praveen Resort, Sirsaganj, Firozabad, Uttar Pradesh, 283151, IN
Telephone: +91 75-8008-5005
Price range: ₹₹₹
Rating: 4.9

HyperCold™ builds high-performance cold rooms and cold storage systems for agriculture, food processing, pharma, dairy, FMCG, mushroom farming, fruits, vegetables, frozen products and industrial applications. From small walk-in cold rooms to large turnkey cold storage projects — design, PUF panel structure, Daikin commercial refrigeration, installation, automation and AMC support across India.

Get Instant Quote

WhatsApp the Cooling Expert

Or call +91 75-8008-5005 (Mon–Sat, 9 AM–8 PM IST)

Daikin OEM Equipment
BIS IS 661 / IS 12436 Compliant
100+ Projects · 18 States
24 Hr Emergency Response
Mushroom
Fruit CA Storage
Pharma
Dairy
Blast Freezers
Walk-in Cold Rooms
Solar Integrated

Check SubsidySubsidy

Call NowCall

WhatsAppChat

PAN India Service · Free Site Survey

Get Free Cold Room Project Estimate

Share your cold room requirement and our cooling expert will help you with the right size, temperature range, machine selection, and project estimate.

Cold rooms, cold storage & freezer rooms
Mushroom, fruit, vegetable & pharma cold rooms
Banana ripening chambers & CA storage
PUF panel rooms with Daikin refrigeration
Free site survey, DPR & subsidy guidance
PAN India installation & AMC support

Talk to Cooling Expert on WhatsApp

+91 75-8008-5005

Free Estimate Takes ~45 seconds

Get Your Cold Room Estimate

Share 5 quick details — our cooling expert will call you back with the right size, temperature, and price.

1. Your details2. Submit & get callback

Full Name

Mobile / WhatsApp

City

State

What do you need?

2-hour callback
PAN India service
Quality guaranteed
100% Private

Industry Solutions

Engineered For Your Industry

Purpose-built cold rooms tailored to your product's exact temperature, humidity, and compliance requirements.

Multi-Zone

Agri & Produce

Multi-temperature cold rooms for fruits, vegetables, CA storage, and mushroom growing rooms — engineered for India's harvest cycles.

Dairy & FMCG

Consistent 2–4°C cold chain for milk, curd, paneer, beverages, and packaged FMCG goods with FSSAI-compliant temperature logging.

Meat & Seafood

Deep freeze and blast freezer rooms at -18°C to -35°C for fish, poultry, and red meat — built for APEDA & MPEDA export compliance.

Pharma & Healthcare

2–8°C vaccine & medicine storage with continuous data logging, backup cooling, and alarm systems for pharma cold chain.

HORECA

Walk-in chillers and freezers for hotels, restaurants, and caterers — compact footprint with rapid pull-down and easy access design.

Retail & Logistics

Large-scale distribution cold stores, multi-chamber warehouses, and reefer staging areas for 3PL and retail cold chain networks.

-25 to 10°C

75–90%

View Solution

Projects Commissioned

Cities Served PAN India

0°C

Temp Range Capability

Avg. Delivery (Days)

Energy Savings

Years Warranty

India's Cold Chain Crisis

The Numbers That Demand Action

Despite being the world's 2nd largest producer of fruits & vegetables, India loses ₹1.53 lakh crore annually due to inadequate cold chain infrastructure.

Post-Harvest Losses

By Category (%)

NABCONS 2022

Livestock (Eggs, Fish, Meat)0%

Fruits0%

Vegetables0%

Pulses0%

Cereals0%

Infrastructure Gap

Deficit percentage (NCCD)

NCCD Report

Pack-houses0%

Ripening Chambers0%

Reefer Vehicles0%

Cold Storage0%

40M+MT

Cold Storage Capacity

70%+ used for potatoes alone

80%

Unorganized Sector

Fragmented small-scale operators

50%+

UP & West Bengal

6,300+ facilities across India

600M

Urban Pop. by 2031

Driving fresh food demand surge

Not sure where to start?

Use the HyperCold Project Selector to pick the right cold room

A short, guided wizard that turns your commodity, capacity and site details into a recommended project type — with a clear next step toward a BOQ-priced quotation.

Open Project Selector

Skip to quotation

7-question guided picker

Commodity, temperature, capacity, location and finance — answered in under 2 minutes.

Recommends the right project type

Chiller, freezer, blast, ripening, mushroom, pharma or CA — mapped to your use-case.

Surfaces eligible subsidies

Shortlists the schemes that historically apply to your project profile, subject to notification.

Knowledge before quotation

Read this before you ask for a cold room price

A quotation is the last 10 minutes of a much larger decision. These short guides cover the engineering and commercial fundamentals — so the BOQ you receive actually matches your project.

What drives cold room cost in India

Panel thickness, refrigeration brand, ambient design and civil readiness — the real cost levers.

Read guide

Designing an F&V cold storage

Commodity compatibility, humidity, ante rooms and the ethylene problem you can't ignore.

Read guide

Blast freezer vs walk-in freezer

Why air velocity, air-off temperature and cycle time matter more than the room's setpoint.

Read guide

Pharma cold rooms — built for validation

Mapping, N+1 redundancy, alarms and DQ/IQ/OQ documentation expectations.

Read guide

Visit the Knowledge Hub

I'm ready — start my quotation

Cold Room Solutions

Purpose-Built for Every Temperature

From chiller rooms to blast freezers — precision-engineered cold rooms with Daikin-powered refrigeration, BIS-compliant PPGL PUF panels, and tropicalized design.

Temperature range°C

01Chiller Rooms

02Freezer Rooms

03Blast Freezers

04Ripening Chambers

05CA Storage

06Pharma Cold Rooms

Chiller Rooms

❄️

+2°C to +8°C

Ideal for preserving freshness of perishable goods. Designed for Indian ambient temperatures up to 50°C with tropicalized condensing units.

Fruits & VegetablesDairy ProductsPharmaceuticalsFresh Flowers

PPGL PUF: 100mm
Humidity: 85–95%
Compressor: Scroll / Reciprocating

Get Quotation

Freezer Rooms

🧊

-18°C to -25°C

Heavy-duty storage for frozen products. Equipped with oversized condensers for peak Indian summer performance.

Frozen FoodsMeat & PoultryIce CreamSeafood

PPGL PUF: 120mm
Humidity: N/A
Compressor: Semi-hermetic / Screw

Get Quotation

Blast Freezers

🌬️

-35°C to -40°C

Rapid freezing within hours preserves texture and nutrition. Essential for EU/US export compliance.

Rapid FreezingSeafood ExportReady MealsIQF Products

PPGL PUF: 150mm
Humidity: N/A
Compressor: Screw Compressor

Get Quotation

Ripening Chambers

🍌

+14°C to +20°C

Ethylene-controlled environments for uniform ripening with FSSAI-compliant practices (no Calcium Carbide).

BananasMangoesAvocadosPapayas

PPGL PUF: 80mm
Humidity: 90–95%
Compressor: Scroll

Get Quotation

CA Storage

🍎

+0°C to +4°C

Controlled atmosphere with O₂/CO₂ regulation extends apple shelf life up to 9 months. Key for Himachal & Kashmir growers.

Apple StorageKiwiPearExport Crops

PPGL PUF: 100mm
Humidity: 90–95%
Compressor: Semi-hermetic

Get Quotation

Pharma Cold Rooms

💊

+2°C to +8°C

24×7 temperature logging, dual compressor backup, and alarm systems for India's pharma cold chain.

VaccinesInsulinBiologicsBlood Banks

PPGL PUF: 100mm
Humidity: Controlled
Compressor: Scroll w/ Redundancy

Get Quotation

Sectors We Serve

Cold Chain Solutions Across Every Industry

From farm-gate pre-cooling to pharmaceutical-grade storage — precision-engineered cold rooms tailored to sector-specific compliance and operational needs.

Farmer walking along a bund through green paddy fields in India

Agriculture

₹1.53 L Cr

Annual Post-Harvest Loss (NABCONS 2022, MoFPI)

India is the 2nd largest producer of fruits & vegetables globally

6–15% post-harvest losses for fruits & vegetables (NABCONS 2022)

Only 12% of total produce stored in cold storage facilities

97% of fruits & vegetables transported by road without refrigeration

Cold rooms extend shelf life from 2–3 days to 2–4 weeks

UP leads India in vegetable output at 34.43 million tonnes

Engineered for India

Cold Rooms Designed for Indian Conditions

India is not Europe. Our systems are purpose-engineered for extreme heat, erratic power, high humidity, and infrastructure realities that generic providers ignore.

Aerial view of green farmland, a road and a river in India

50°C+

Extreme Ambient Temperatures

Indian summers push ambient to 45–50°C. Our systems use tropicalized condensing units with oversized condensers rated for peak performance.

6–10 hrs

Erratic Power Supply

Many regions face daily outages. Every HyperCold unit is DG-compatible and solar-hybrid ready with ±15% voltage tolerance.

95%+ RH

High Humidity Zones

Coastal and monsoon regions demand vapor-tight panel joints and proper air circulation to prevent condensation and mold.

365 Days

Dust & Corrosion

From Rajasthan's desert dust to coastal salt air — pre-painted GI/SS finish panels resist corrosion year-round.

99%

Infrastructure Gaps

India's pack-house infrastructure gap stands at 99%. HyperCold bridges this with modular, quick-install cold rooms. Source: NCCD All-India Cold-Chain Infrastructure Capacity Assessment, NABCONS (2015 baseline).

35-50%

Subsidy Documentation Support — NHB, MIDH, PMKSY

Capital subsidy: 35% in general areas, 50% in NE/Hilly/Scheduled Areas (NHB Operational Guidelines). Eligible capacity above 5,000 MT up to 10,000 MT (1,000+ MT for NE States). Add-ons: up to ₹5 cr for CA projects, up to ₹2.5 cr for modernization. We handle DPR, heat-load calculations, joint inspection, and final claim filing within 18 months of term loan disbursement.

Technical Specifications

Built to Indian Standards

Every component is selected for durability, compliance, and peak performance under Indian operating conditions.

Close-up of flat insulated metal wall panels with fine horizontal ribbing and dark accent bands.

Insulation — PPGL PUF Panels

Material

CFC-Free PUF

Density

40 ± 2 kg/m³

Thickness

60–150mm

Finish

GI / Stainless

Joint

Cam-lock / T&G

Fire Rating

B2 Rated

Row of outdoor condensing units with twin fans mounted on a warehouse wall below profiled metal cladding.

Refrigeration Systems

Compressor

Scroll / Screw

Brand

Daikin OEM

Refrigerant

R32 / R134a (low-GWP)

Ambient

45–50°C Rated

Condenser

Oversized

Energy

ISEER Comp.

Electrical & Controls

Panel

PLC / Digital

Voltage

±15% Rated

Backup

DG + Solar

IoT

Remote Ready

Alarms

Multi-Zone

Logging

Digital Data Logger

Grey steel door set into a white profiled insulated panel wall with a light fitting above.

Doors & Access

Types

Slide / Hinged

Insulation

PUF-Filled

Hardware

SS + Safety

Heater

Anti-Frost

Vision

Heated Glass

Air Curtain

Available

Compliance & Subsidies

Every Standard Met. Every Subsidy Covered.

Compliance isn't optional — it's the difference between operational success and shutdown. We meet every Indian regulatory requirement.

FSSAI

Food Safety & Standards Authority

Mandatory hygiene & temperature norms
Regular monitoring & audit trails
License required for food cold storage
Temperature logging records mandatory

BIS / IS 661

Bureau of Indian Standards (IS 661 / IS 12436)

IS 661 cold storage thermal insulation code
IS 12436 rigid PUF panel specification
PUF density: 40 ± 2 kg/m³ mandatory
GI/SS finish for corrosion resistance

NHB / MIDH

National Horticulture Board

Technical standards for cold storage
Capital subsidy up to 35%
MIDH integrated development scheme
State-level subsidies additionally

PMKSY

PM Kisan Sampada Yojana

Financial aid for cold chain infra
Integrated Cold Chain scheme
Mega food park support
Credit-linked subsidy model

Cold Chain

Pharma Cold Chain Best Practices

Designed for pharma cold storage workflows
Temperature validation & mapping
24×7 monitoring with alarms
Dual compressor redundancy

Client journey

From first enquiry to commissioned cold room — in 7 stages

HyperCold projects follow the same disciplined path whether it's a 5-ton chiller or a 5,000-ton cold storage. Indicative timeline; site readiness and approvals vary by project.

1. Project discovery
Share commodity, capacity, target temperature, site location and timeline.
2. BOQ-priced quotation
Heat-load worksheet, panel + refrigeration sizing, line-item BOQ — no thumb-rule pricing.
3. Subsidy mapping
Shortlist of MIDH / NHB / MoFPI / AIF / state schemes you may be eligible for.
4. Banking & finance
21-item document checklist, EMI calculator and bank-ready DPR support.
5. DPR & approvals
Detailed Project Report aligned to scheme norms and bank appraisal requirements.
6. Build & commission
PUF panel manufacturing at Firozabad, pan-India installation, leak test and handover.
7. AMC & uptime
Annual maintenance contract with response SLA and spares planning.

Why HyperCold is Different

A cold-chain engineering approach — not just another quotation

HyperCold™ designs cold room solutions based on product type, temperature requirement, storage capacity, loading pattern, location, insulation and refrigeration selection — before any price is finalised.

Project-specific planning

Every cold room is scoped for the actual product, capacity, temperature and site — not picked off a brochure.

Application-based temperature

We suggest the temperature band based on your commodity, shelf-life goal and loading pattern.

Capacity & sizing support

Room size, storage in MT, daily loading and turnover are reviewed before we quote panels or refrigeration.

Panel & refrigeration selection

PUF panel thickness, insulation and refrigeration choice matched to heat-load — not a fixed template.

Practical cost explanation

We explain how thickness, TR, automation, location and civil work affect price before you finalise.

DPR & subsidy documentation

Where applicable, we help prepare technical quotations and project details for DPR and subsidy filings.

Buyer education first

Knowledge Hub, calculator and FAQs help you evaluate the right requirement before choosing a vendor.

India-focused solutions

Designed around Indian ambient conditions, power reality, transport access and site constraints.

WhatsApp-first enquiry

Share your product, capacity and location on WhatsApp — technical discussion, not a sales pitch.

Technical discussion before quote

We review the requirement first, then send a line-item BOQ — no vague lump-sum numbers.

Buyer decision guide

Before choosing a cold room vendor, compare these points

A cold room is a multi-year capex decision. The differences below often matter more than the sticker price.

Decision point	Generic vendor approach	HyperCold approach
Requirement understanding	Quotation with limited project details	Reviews product, capacity, temperature, loading pattern and location before quoting
Temperature planning	One-size-fits-all assumptions	Suggests temperature range based on actual product and application
Capacity selection	Depends mostly on rough room size	Considers storage capacity, product type, daily loading and storage duration
Cost explanation	Shares price without explaining major cost factors	Explains how panel thickness, refrigeration, capacity, location and automation affect cost
Buyer education	Limited information shared	Guides, FAQs, calculator and consultation support before quotation
DPR & documentation	Often not included	Technical quotation and project details usable for DPR and subsidy documentation where applicable
After-sales clarity	Not always clearly defined	Installation, maintenance, warranty and AMC support explained upfront

General guidance for cold room buyers in India. No specific vendor is named or compared.

Application matters

Not every cold room is the same

A mushroom cold room is not the same as a fruit cold room. A banana ripening chamber is not a frozen storage room. A pharma cold room needs different planning than a vegetable cold room. A blast freezer follows different refrigeration logic than a regular chiller.

ApplicationTemperature requirementMain design concernMistake to avoid

Mushroom cold room

0 °C to 18 °C (spawn/crop/storage)

Humidity and air circulation

Using a generic vegetable cold room design

Banana ripening chamber

14 °C to 20 °C (controlled cycle)

Airflow, cycle staging and ethylene handling

Treating it like a normal chiller

Fruit & vegetable cold room

0 °C to 12 °C (commodity-specific)

Shelf-life, loading pattern and door usage

Storing multiple commodities at one setpoint

Pharma cold room

2 °C to 8 °C (stable, monitored)

Temperature stability, monitoring and backup

Ignoring monitoring and redundancy

Frozen storage room

−18 °C to −25 °C

Insulation, floor design and refrigeration capacity

Under-sizing panels and refrigeration

Blast freezer

−35 °C to −40 °C (pull-down)

Batch size, pull-down time and TR capacity

Sizing like a regular freezer room

Walk-in chiller

2 °C to 8 °C

Door usage, indoor/outdoor placement, modularity

Ignoring door opening frequency

Avoidable mistakes

Common mistakes buyers make while planning a cold room

Most cold room problems don't start at installation — they start at planning. These are the pitfalls we help clients avoid before quotation.

Choosing only based on the lowest quotation

Not calculating actual product load

Ignoring daily loading pattern

Choosing the wrong temperature range

Using the wrong PUF panel thickness

Not planning electrical load and backup

Ignoring door opening frequency

Not considering drainage and flooring

Not checking service and AMC support

Not asking for technical quotation details

Assuming subsidy is guaranteed

Not planning maintenance and AMC

Share your requirement before finalising your cold room. HyperCold can help you review the correct application, capacity and temperature requirement.

Get Cold Room Quotation

WhatsApp Expert

Buyer checklist

Cold room buyer checklist

Use this checklist before requesting your final cold room quotation. The clearer these inputs, the more accurate the BOQ.

01.Product to store is clearly defined
02.Required temperature is known
03.Capacity in MT is estimated
04.Room size is planned
05.Daily loading quantity is known
06.Storage duration is clear
07.Door opening frequency is considered
08.PUF panel thickness is selected properly
09.Refrigeration system is selected based on heat load
10.Electrical supply is checked
11.Flooring and drainage are planned
12.Installation location is finalised
13.Budget range is realistic
14.Warranty and AMC are understood
15.Subsidy eligibility is verified separately

Planning a cold room? Don't finalise on room size or lowest price alone.

Share your product, capacity, required temperature and location. HyperCold will help you review the right cold room requirement before quotation.

Get Cold Room Quotation

WhatsApp Expert Calculate Requirement Call HyperCold

The HyperCold Advantage

Why India's Smartest Businesses Choose HyperCold

Engineering precision, regulatory compliance, and climate-specific design — every cold room we build is a competitive advantage.

Daikin-Powered Precision

Official specifications, not generic estimates. Daikin-based machine selection ensures exact capacity matching for your cold room dimensions.

BIS & FSSAI Compliant

Every installation meets IS 661 / IS 12436 panel standards and FSSAI food safety norms. No shortcuts.

Indian Climate Engineered

Designed ground-up for 45–50°C ambient, high humidity, dust, power fluctuations. Purpose-built for India, not adapted imports.

Subsidy-Ready Projects

Complete documentation support for NHB, MIDH, PMKSY, and state-level cold chain subsidy schemes. We handle the paperwork.

IoT Monitoring Ready

Optional remote monitoring with real-time temperature tracking, alerts, and compliance reporting. Data-driven cold chain operations.

Pan-India Installation

From Firozabad to the farthest corner — our teams deliver, install, and commission across India with post-installation AMC support.

Smart Comparison

Why HyperCold vs Local Fabricator?

See the engineering difference. Every factor impacts your product quality, energy bills, and long-term ROI.

Factor

Common Industry Shortcuts

HyperCold Engineering Standard

Insulation Quality

CommonBasic thermocol / low-density PUF

HyperColdEngineered high-density PPGL PUF panels (40±2 kg/m³)

Load Calculation

CommonRule-of-thumb sizing without heat-load calculation

HyperColdStructured cooling load model per product

Refrigeration Brand

CommonMixed-brand compressors without OEM warranty

HyperColdDaikin commercial refrigeration (genuine)

Panel Joints

CommonSilicone-only joints (degrades 3-5 years)

HyperColdCam-lock jointed, airtight for decades

Temperature Accuracy

Common±2-3°C typical fluctuation

HyperCold±1°C precision in steady-state

Lifecycle Cost

CommonHigher operating costs without engineering optimization

HyperColdOptimized — 40% lower energy consumption

Quotation Transparency

CommonLump-sum quote, no engineering specs

HyperColdLine-item BOQ with engineering specs

After-Sales Support

CommonAd-hoc service without scheduled AMC

HyperColdStructured AMC + spare parts network

No changed facts — only structured presentation of engineering reality.

Engineering Authority

Why Trust HyperCold?

We don't just sell cold rooms. We engineer complete cold chain solutions backed by structured processes and genuine Daikin equipment.

10+ Years Engineering

Deep technical expertise in refrigeration system design.

PAN India Coverage

Design, supply, and execution anywhere in India.

Turnkey Execution

From concept to commissioning — single point responsibility.

After-Sales Support

Structured AMC and rapid breakdown response.

Spare Parts Network

Genuine Daikin spares available across India.

Structured Quotations

Transparent, engineering-backed pricing with full BOQ.

Our 5-Step Engineering Process

Every project follows a structured, transparent workflow.

Requirement Analysis

We study your product, volume, and site conditions.

Design Engineering

Load calculation, panel layout, and refrigeration sizing.

Quotation Generation

Detailed BOQ with transparent line-item pricing.

Manufacturing & Dispatch

Factory-built panels and branded equipment shipped.

Installation & Commissioning

On-site execution with testing and handover.

See How We Calculate

Engineering Transparency

We don't hide behind lump-sum quotes. Every number in our quotation comes from structured engineering logic.

See It in Your Quotation

Cooling Load Calculation

Product heat load based on specific heat and respiration rate
Transmission load through walls, floor, and ceiling
Infiltration load from door openings and air changes
Equipment and personnel heat contribution

Panel Thickness Selection

80mm PPGL PUF for 2–15°C (F&V, Ripening, Ante Room)
100mm PUF for 0–5°C (Chiller, Meat, Pharma)
120mm PUF for -18 to -25°C (Freezer)
150mm PUF for -30 to -40°C (Deep Freeze, Blast)

Power Requirement Method

Compressor kW based on matched Daikin ODU/IDU capacity
Defrost cycle energy factored for LT applications
Fan motor and lighting loads included
Safety factor of 10–15% for peak conditions

Lifecycle Cost Impact

High-density PUF reduces thermal bridging by 35%
Inverter-ready Daikin compressors cut energy 40%
Cam-lock panels eliminate maintenance for 15+ years
Structured AMC prevents costly emergency breakdowns

Engineered Solutions

Cold Room Solutions

Every system is engineered to your exact load, commodity, and climate requirements.

Mushroom Cold Room

Precision humidity & temperature control for spawn running, growing, and storage phases.

Spawn Run: 22-25°C

Cropping: 14-18°C

Storage: 0-4°C

200-5,000 sq ft growing area

Get Quotation

High ROI

Banana Ripening Chamber

Ethylene-controlled ripening with uniform color development across all tiers.

14°C – 20°C

3 MT – 30 MT

Ethylene: 100-150 ppm, 24-48 hr exposure
Humidity: 90-95% RH, CO₂ <1%
FSSAI compliant — no Calcium Carbide

Get Quotation

Fruits & Vegetables

Multi-commodity pre-cooling and long-term storage with optimized airflow design.

0°C – 15°C

10 MT – 500 MT

Get Quotation

Premium

CA Cold Storage

Gas-tight controlled atmosphere for 8–12 month preservation of apples, kiwi & pomegranate.

0°C – 4°C

100 MT – 5000 MT

O₂ 1-3%, CO₂ 1-5% controlled atmosphere

Get Quotation

Industrial Cold Room

Heavy-duty blast freezing and cold storage for meat, seafood, and dairy processing.

-40°C – 5°C

50 MT – 2000 MT

Structural design per IS 875 Part-II/III & IS 1893

Get Quotation

New

Egg Cold Room

Shell-egg holding rooms for layer farms, NECC traders and hatcheries — built for Indian summer ambient.

4°C – 8°C

1 MT – 25 MT (~18k – 4.5L eggs)

75-85% RH, low-velocity uniform air flow
Ante / tempering area to stop shell sweating

Get Quotation

Enterprise

Industrial HVAC

Centralized cooling, AHU systems, and precision air conditioning for factories & warehouses.

Custom

Custom TR

Get Quotation

Delivered & Commissioned

Project Portfolio

Real installations. Real specifications. Verified performance.

Project Portfolio Available on Request

Selected installations across India. Detailed project references — including client names, capacity, commissioning dates, and energy performance data — provided under NDA for serious enquiries.

Request Project References

Knowledge Center

Technical FAQs

Real engineering answers — not marketing fluff. Learn from our 10+ years of cold room engineering experience.

About HyperCold

Engineering Excellence

HyperCold™ helps Indian businesses plan cold room and cold storage solutions for products that need controlled temperature environments — focused on understanding the product, temperature, capacity, loading pattern and site before suggesting the right configuration.

Projects: 100+
Clients: 100+
Avg. Energy Savings: 40%
Compressor Warranty: 5 Yr

Compressor: 5 years (Daikin OEM standard). PUF panels: 10 years against delamination. Refer to project AMC contract for component-level warranty terms. Energy savings vs. non-inverter refrigeration baseline; project-specific savings depend on load profile and ambient conditions.

Steel roof trusses being erected by two workers on a scissor lift

Our Engineering Capabilities

Daikin Equipment Partner – genuine compressors & warranty

In-house design team: AutoCAD, cooling load, structural calculations

PUF panel manufacturing tie-ups (60-150mm thickness, 40-45 kg/m³ density)

PAN India installation with dedicated commissioning engineers

Subsidy documentation support for NHB, MIDH, PMKSY schemes

Post-installation AMC & remote monitoring services

💡 Our Promise

Engineering-led cold room solutions with line-item BOQ pricing, BIS-compliant components, and PAN India installation backed by structured AMC.

Discuss Your Project →

2019
Cold chain refrigeration practice begins
2023
HyperCold registered in Firozabad, UP (GSTIN 09IJGPS0340A1ZF)
2024
Daikin equipment partnership established
2025
HyperCold™ digital quotation platform launched

Ready to get started?

Share your requirement and get a free cold room project estimate.

Get Free Estimate

2-min form No spam

Get In Touch

Contact Us

Choose your preferred way to reach us — response within 2 hours during business hours.

Call / WhatsApp

+91 75-8008-5005 Sales (Call only): +91 78-9593-9400

Email Us

Sales@hypercold.co.in

Hypercoldenterprise@gmail.com

Location

Firozabad, UP

Free Estimate Takes ~45 seconds

Get Your Cold Room Estimate

Share 5 quick details — our cooling expert will call you back with the right size, temperature, and price.

1. Your details2. Submit & get callback

Full Name

Mobile / WhatsApp

City

State

What do you need?

2-hour callback
PAN India service
Quality guaranteed
100% Private

Cold Room Manufacturer in Indiafor Modular Cold StorageCommercial Refrigeration & Industrial Cooling Projects

Get Free Cold Room Project Estimate

Get Your Cold Room Estimate

Engineered For Your Industry

Agri & Produce

Dairy & FMCG

Meat & Seafood

Pharma & Healthcare

HORECA

Retail & Logistics

The Numbers That Demand Action

Post-Harvest Losses

Infrastructure Gap

Use the HyperCold Project Selector to pick the right cold room

7-question guided picker

Recommends the right project type

Surfaces eligible subsidies

Read this before you ask for a cold room price

What drives cold room cost in India

Designing an F&V cold storage

Blast freezer vs walk-in freezer

Pharma cold rooms — built for validation

Purpose-Built for Every Temperature

Chiller Rooms

Freezer Rooms

Blast Freezers

Ripening Chambers

CA Storage

Pharma Cold Rooms

Cold Chain Solutions Across Every Industry

Agriculture

Cold Rooms Designed for Indian Conditions

Extreme Ambient Temperatures

Erratic Power Supply

High Humidity Zones

Dust & Corrosion

Infrastructure Gaps

Subsidy Documentation Support — NHB, MIDH, PMKSY

Built to Indian Standards

Insulation — PPGL PUF Panels

Refrigeration Systems

Electrical & Controls

Doors & Access

Every Standard Met. Every Subsidy Covered.

From first enquiry to commissioned cold room — in 7 stages

1. Project discovery

2. BOQ-priced quotation

3. Subsidy mapping

4. Banking & finance

5. DPR & approvals

6. Build & commission

7. AMC & uptime

A cold-chain engineering approach — not just another quotation

Project-specific planning

Application-based temperature

Capacity & sizing support

Panel & refrigeration selection

Practical cost explanation

DPR & subsidy documentation

Buyer education first

India-focused solutions

WhatsApp-first enquiry

Technical discussion before quote

Before choosing a cold room vendor, compare these points

Not every cold room is the same

Common mistakes buyers make while planning a cold room

Cold room buyer checklist

Planning a cold room? Don't finalise on room size or lowest price alone.

Why India's Smartest Businesses Choose HyperCold

Daikin-Powered Precision

BIS & FSSAI Compliant

Indian Climate Engineered

Subsidy-Ready Projects

IoT Monitoring Ready

Pan-India Installation

Why HyperCold vs Local Fabricator?

Why Trust HyperCold?

10+ Years Engineering

PAN India Coverage

Turnkey Execution