Equipment / Daikin Commercial Refrigeration
Daikin Commercial Refrigeration for Cold Rooms and Cold Storage Projects
Daikin commercial refrigeration is HyperCold's preferred platform for chillers, freezer rooms and small-to-mid cold storage projects. Daikin scroll condensing units, inverter compressors and ZEAS-class rack systems are selected from official ODU/IDU charts for the calculated heat load — not by thumb rule.
We pair Daikin OEM equipment with our PUF panel construction, Carel / Danfoss controls and a pan-India installation crew to deliver a single-vendor cold room solution.
- Daikin scroll condensing units & inverter ODUs
- Selection from official Daikin technical charts
- ZEAS class rack systems for larger loads
- Long parts-support life via Daikin India network
- Quiet, low-vibration outdoor units
- Pan-India installation & AMC by HyperCold
Typical applications
Technical Specifications & Construction
Every daikin commercial refrigeration we build follows the same engineering discipline — sized to your load, not picked off a brochure. Specifications below reflect typical HyperCold builds.
- Compressor types
- Scroll, inverter scroll, semi-hermetic
- Refrigerants
- R-410A, R-32, R-449A, R-507 (per application)
- Outdoor unit
- Daikin commercial ODUs, low-noise variants
- Indoor unit
- Daikin air-cooled evaporators or matched IDUs
- Selection method
- Official Daikin ODU/IDU charts, validated for site ambient
- Controls
- Carel / Danfoss digital with Modbus
How HyperCold Designs This Cold Room
These are the design factors we lock down before quoting. Skip any of these and the project either runs hot, drinks electricity, or under-delivers on shelf life.
Product-specific temperature & humidity
We design from the commodity's psychrometric envelope, not a generic chiller spec. Different storage life targets get different design points.
Humidity & moisture control
Coil sizing, defrost strategy and air-throw decide whether your product dries out, sweats, or holds quality.
Air change rate & throw pattern
Velocity through the stack governs uniform pull-down. We engineer 25–60 ACH per room volume, not a default.
Refrigeration sizing on actual load
Heat load is calculated from product, infiltration, lighting, defrost, motor and personnel — never a TR/MT thumb rule.
Panel selection by ambient
100 mm in moderate zones, 150 mm in Rajasthan / interior MH. Panel density never below 40 kg/m³.
Serviceable layout & AMC access
Compressor decks, drain lines and electrical panels laid out for one-hand servicing — saves cost over 10 years.
What Drives the Project Cost
We don't quote square-foot rates — every build is BOQ-priced. The factors below decide where your project lands within a realistic range.
- 01Internal volume in CFT and storage tonnage
- 02Target temperature band (chiller, freezer, sub-zero, deep-freeze)
- 03PUF panel thickness and density
- 04Refrigeration capacity (TR) and compressor brand
- 05Daily product load and door-opening frequency
- 06Insulation upgrades for Tier-2 / hot-climate sites
- 07Civil work, levelling, drainage and trenching
- 08Electrical infrastructure, DG backup and stabilisation
- 09Automation level — basic, IoT-enabled, or SCADA
- 10Installation distance from Sirsaganj base and site access
- 11GST and statutory inclusions (toggled in BOQ)
- 12AMC tier — Standard, Pro, or 24×7 Critical
Why Operators Choose HyperCold
Engineered selection
Every Daikin unit on a HyperCold project is selected from the official chart for your ambient and load — not a generic TR rating.
Parts & service network
Daikin India has the deepest service network — long-term parts and support availability across all states.
Quiet, efficient outdoor units
Daikin commercial ODUs are quieter than most alternatives — important for rooftop installs in hotels and city projects.
Genuine OEM
We supply genuine Daikin OEM equipment with serial-numbered traceability and original warranty.
Frequently Asked Questions
Subsidies & finance that may apply
Eligibility depends on project type, applicant category, state and current government notification. Below is indicative — verify with the official scheme portal before applying.
MIDH (State Horticulture Mission)
Credit-linked back-ended capital assistance for horticulture cold storage and pack houses.
Read scheme detailsNHB Cold Storage Subsidy
National Horticulture Board capital subsidy for cold storage and CA storage projects.
Read scheme detailsMoFPI Integrated Cold Chain (PMKSY)
Grant-in-aid for integrated pre-cooling, IQF, blast freezing, CA and reefer logistics.
Read scheme detailsAgriculture Infrastructure Fund (AIF)
Interest subvention and credit guarantee on bank term loans for post-harvest infrastructure.
Read scheme detailsPMFME — Micro Food Processing
Credit-linked subsidy for micro food processing units including small cold rooms.
Read scheme detailsState Subsidy Schemes
State Horticulture, Food Processing, SC/ST and SHG components vary by state action plan.
Read scheme detailsMSME & Bank Finance (CGTMSE, SIDBI, NABARD)
Term loan and working capital options via scheduled banks, SIDBI, NABARD and cooperatives.
Read scheme detailsReady to scope your daikin commercial refrigeration?
Share your product, room size, and target temperature. We'll send a BOQ-priced quote with PUF, refrigeration, installation, and AMC — pan-India delivery from Sirsaganj, Firozabad.